Lennox

Evaporator Mini-Split System

Indoor Model: MSG09CR-E
Description: Quiet Evaporators operation- due to large Diameter Cross Flow Fan, which greatly reduces air noise. Improved temperature and humidity control-by using Hydrophilic Aluminum Fins. Auto Restart- When Power supply is interrupted and the restores, the unit automatically resets to the previous function. High efficiencies- are attained due to its Trapeziform inner groove Copper tubing. Increased Heat Transfer capability - by a 4-bend Heat Exchanger which has a surface greater by up to 32% from standard units. Sleep mode- Unit will decrease temperature 1 degree per hour for the first two hours then hold for next 5 hours at which, it will return to original Temp.

Condenser Mini-Split System

Outdoor Model: MSG09CR-C
Description: Extremely quiet Condenser- is attained by using Bird Tail Propeller Fan. Durable Condenser Cabinet- coated Electrolytic Zinc and Anti-Rust paint including internal components. Auto Restart- When Power supply is interrupted and the restores, the unit automatically resets to the previous function. High efficiencies- are attained due to its Trapeziform inner groove Copper tubing. Increased Heat Transfer capability - by a 4-bend Heat Exchanger which has a surface greater by up to 32% from standard units. Sleep mode- Unit will decrease temperature 1 degree per hour for the first two hours then hold for next 5 hours at which, it will return to original Temp.

Condenser 13ACE Efficiency 13.0

Model: 13ACE
Description: Durable, Corrosion-Resistant Cabinet Constructed of heavy gauge, galvanized steel and protected by an enamel finish. Precision-Balanced, Direct-Drive Fan- Designed to run more slowly and quietly then standard fans. Reciprocating compressor- Ensures years of efficient, reliable perfomance. Reusable Service Valves- Allow for Pump down cycle if access to the System is needed. Drainage Holes- Prevent damaging moisture from collecting inside the units base pan. Enhanced Coil Guard- Protects the condenser coil, maintaining the Efficiency of the unit.

BC Series Residential Air Handlers

Model: BC
Description: As one of ADP´s first air handlers, the BC Series is an all-season fit for typical residential retrofit situations. This series features several flexible options, such as 88 different models available to properly match with an outside unit for maximum efficiency. In addition, the units are available with electric, hot water or no heat and are simple to install and service.

Suitable for use with R-22 and R410A refrigerants. 40VA control voltage transformer. Florators come standard, but optional factory or field-installed screw-on expansion valves are available for R-22 and R410A and for AC/HP. Optional factory-installed or kit circuit breaker, 5-10 kW; standard on 12.5 kW and higher. All air handlers are top-handing packaged with bar coding and full description on label. All coils are individuaklly pressure and helium tested at 450 PSI, pressurized and sealed.

Packaged Electric TC

Model: T-CLASS ROOFTOP UNITS - 60HZ
Description: ETL and CSA listed. Components bonded for grounding to meet safety standards for servicing required by UL, CSA and National and Canadian Electrical Codes. 180 thru 240 models are certified in accordance with the ULE certification program, which is based on ARI Standard 340/360-2000. 300S models are tested at conditions included in ARI Standard 340/360-2000. ISO 9001 Registered Manufacturing Quality System. ENERGY STAR® certified units are designed to use less energy, help save money on utility bills, and help protect the environment. Designed to maximize sensible and latent cooling performance at design conditions. Two efficiency levels provide flexibility. System can operate from 30°F to 125°F without any additional controls.







			Evaporator Mini-Split System Indoor Model: MSG09CR-E Description: Quiet Evaporators operation- due to large Diameter Cross Flow Fan, which greatly reduces air noise. Improved temperature and humidity control-by using Hydrophilic Aluminum Fins. Auto Restart- When Power supply is interrupted and the restores, the unit automatically resets to the previous function. High efficiencies- are attained due to its Trapeziform inner groove Copper tubing. Increased Heat Transfer capability - by a 4-bend Heat Exchanger which has a surface greater by up to 32% from standard units. Sleep mode- Unit will decrease temperature 1 degree per hour for the first two hours then hold for next 5 hours at which, it will return to original Temp. Condenser Mini-Split System Outdoor Model: MSG09CR-C Description: Extremely quiet Condenser- is attained by using Bird Tail Propeller Fan. Durable Condenser Cabinet- coated Electrolytic Zinc and Anti-Rust paint including internal components. Auto Restart- When Power supply is interrupted and the restores, the unit automatically resets to the previous function. High efficiencies- are attained due to its Trapeziform inner groove Copper tubing. Increased Heat Transfer capability - by a 4-bend Heat Exchanger which has a surface greater by up to 32% from standard units. Sleep mode- Unit will decrease temperature 1 degree per hour for the first two hours then hold for next 5 hours at which, it will return to original Temp. Condenser 13ACE Efficiency 13.0 Model: 13ACE Description: Durable, Corrosion-Resistant Cabinet Constructed of heavy gauge, galvanized steel and protected by an enamel finish. Precision-Balanced, Direct-Drive Fan- Designed to run more slowly and quietly then standard fans. Reciprocating compressor- Ensures years of efficient, reliable perfomance. Reusable Service Valves- Allow for Pump down cycle if access to the System is needed. Drainage Holes- Prevent damaging moisture from collecting inside the units base pan. Enhanced Coil Guard- Protects the condenser coil, maintaining the Efficiency of the unit. BC Series Residential Air Handlers Model: BC Description: As one of ADP´s first air handlers, the BC Series is an all-season fit for typical residential retrofit situations. This series features several flexible options, such as 88 different models available to properly match with an outside unit for maximum efficiency. In addition, the units are available with electric, hot water or no heat and are simple to install and service. Suitable for use with R-22 and R410A refrigerants. 40VA control voltage transformer. Florators come standard, but optional factory or field-installed screw-on expansion valves are available for R-22 and R410A and for AC/HP. Optional factory-installed or kit circuit breaker, 5-10 kW; standard on 12.5 kW and higher. All air handlers are top-handing packaged with bar coding and full description on label. All coils are individuaklly pressure and helium tested at 450 PSI, pressurized and sealed. Packaged Electric TC Model: T-CLASS ROOFTOP UNITS - 60HZ Description: ETL and CSA listed. Components bonded for grounding to meet safety standards for servicing required by UL, CSA and National and Canadian Electrical Codes. 180 thru 240 models are certified in accordance with the ULE certification program, which is based on ARI Standard 340/360-2000. 300S models are tested at conditions included in ARI Standard 340/360-2000. ISO 9001 Registered Manufacturing Quality System. ENERGY STAR® certified units are designed to use less energy, help save money on utility bills, and help protect the environment. Designed to maximize sensible and latent cooling performance at design conditions. Two efficiency levels provide flexibility. System can operate from 30°F to 125°F without any additional controls.












	www.centuriosa.com © 2007
	www.centuriosa.com © 2007